G400 Series

Category:

Drum brake MATEC type G400 with external spring

Drum brake type "G"

According to DIN 15435

APPLICATIONS

  • Service brake
  • Safety brake
  • Emergency brake

OPERATION

  • Drum brake MATEC type "G" are negative.
  • The braking force is obtained by means of a spring that, through a suitable system of levers, transmits its amplified action to the braking pads.
  • An electrohydraulic or pneumatic thrustor makes an opposite force to the spring, causing the pads to open, therefore the brake to release.
  • The braking force of the linings against the drum can be modulated by adjusting the spring.
  • The braking torque varies according to the spring setting.
  • The brake may be supplied also without external adjustable spring but with inside “C” spring (foreseen to have the maximum brake torque).

ORIGINAL EQUIPMENT

  • Base plate and vertical levers in spheroidal graphite cast iron.
  • Horizontal levers in Fe 510.
  • Pins and rod in steel C40 galvanized or manganese phosphated.
  • Self-lubricating bushes on main joints.
  • Light alloy drums with asbestos free bonded linings
  • Friction coefficient µ=0,42
  • Epoxy resin painting and RAL 3000 final colouring.

OPTIONALS

  • Automatic wear compensation.(RG) automatically it provides to the brake opening adjustment function progressive wear of the brake linings.
  • Larger drum (L) - 50% wider, recommended for heavy services where it is required a high heat dissipation capacity.
  • Open brake indicator, either fitted on thrustor or on spring set (to be specified) (FCA)
  • Linings max wear indicator (fitted on rod) (FCU).
  • Brake manual opening lever (LSM)
  • Stainless steel pins (INOX).

THRUSTOR TYPES

  • MATEC type "M" electrohydraulic
  • EMG type "ELDRO" electrohydraulic
  • EMG type "ELTMA" electrohydraulic
  • Pneumatic cylinder (upon request).

BRAKE SELECTION DATA

  • Type of application
  • Stops per hour
  • Required braking torque
  • Required voltage (standard 230/400V. – Hz. 50) or air pressure supply.
  • Required optional

SHOE BRAKE CODE

  • G= Drum brake according to DIN 15435 for thrustor type MATEC “M” – EMG “Eldro” – EMG “Eltma”
  • 200-250-315-400-500 the same to the diameter of pulley or flexible coupling
  • M22/50 - EB220-50 - ED23/5 ecc. = type of thrustor
  • RG= automatic wear compensation
  • FCU= linings max wear indicator
  • FCA= open brake indicator
  • L= wider shoe
  • INOX= inox steel pins
  • LSM= hand releaser lever

Es.: G200-M22/50-RG-FCA
Diameter 200 Drum brake with thrustor M22/50 – automatic wear compensation – open brake indicator

Freno ServoFreno Coppia  Max Nm

D

a

b

c

d

f

G

h

H Max

k

l

p

t

m

Kg

G 400 M30/50 525 400 240 270 74 22 100 140 280 668 687 150 314 17 168 89
G 400 EB300-50 525 400

240

270 74 22 100 140 280 668 689 150

314

17 175 87
G 400 Ed30/5 525 400

240

270 74 22 100 140 280 668 708 150

314

17 160 91
G 400 M60/50 1045 400

240

270 74 22 100 140 280 668 695 150

314

17 192 93
G 400 EB500-60 1045 400

240

270 74 22 100 140 280 668 695 150

314

17 190 92
G 400 Ed50/6 1045 400

240

270 74 22 100 140 280 668 716 150

314

17 195 102
G 400 M75/50 1330 400

240

270 74 22 100 140 280 668 695 150

314

17 192 93
G 400 EB800-60 1400 400

240

270 74 22 100 140 280 668 695 150

314

17 204 98
G 400 Ed80/6 1400 400

240

270 74 22 100 140 280 668 716 150

314

17 195 103
G 400 M80/60.2 2100 400

240

270 74 22 100 140 280 668 715 150

314

17 234 100